ANALISIS PENGENDALIAN KUALITAS PRODUK BRACKET PADA PT THREE CAST INDONESIA
DOI:
https://doi.org/10.33884/comasiejournal.v11i1.9020Kata Kunci:
DMAIC, RCA, Six SigmaAbstrak
This study aims to identify the underlying cause of the issue at PT Three Cast Indonesia, ascertain the impact of quality control measures on product defects at PT Three Cast Indonesia, and ascertain the outcomes of implementing six sigma techniques in PT Three Cast Indonesia's quality control of bracket products. The technique is an analogous application of DMAIC and other Six Sigma method concepts. The findings indicate that the most common types of defects found in the bracket are air holes, dimension out, scratches, and dents (CTQ). DPMO computation using a 250 defect average. This indicates that there might be 250 problems in every million product units. Level Sigma The bracket manufacturing process operates at 2.174 sigma, or level 4. To eventually achieve a growing Sigma level pattern and a lowering DPMO pattern, the process must still be continually managed and improved. In the DMAIC analysis, the primary sources of product faults are personnel, equipment, processes, and raw materials. People, equipment, procedures, and materials are the sources of probable faults in the RCA analysis quality control of bracket products.
Referensi
Alamsyah, I., & Rochmoeljati, R. (2023). Product Quality Analysis Safety Belt to Reduce Disability Using Six Sigma Method and Repair with Kaizen in PT XYZ. Indonesian Journal of Industrial Engineering & Management, 4(3), 387–394. https://doi.org/10.22441/ijiem.v4i3.21025
Alfie Oktavia, & Herwanto, D. (2021). Analisis Pengendalian Kualitas Produk Menggunakan Pendekatan Statistical Quality Control (SQC) di PT. Samcon. Industri Inovatif : Jurnal Teknik Industri, 11(2), 106–113. https://doi.org/10.36040/industri.v11i2.3666
Ardianto, S. F., & Sumantika, A. (2023). ANALISIS PENGENDALIAN KUALITAS PRODUK PLASTIK DI PT. YEAKIN PLASTIC INDUSTRY. Jurnal Comasie, 9(8), 1050.
Fauzia, A. I., & Hariastuti, N. L. P. (2019). Analisis Pengendalian Kualitas Produk Beras dengan Metode Six Sigma dan New Seven Tools. Jurnal SENOPATI : Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 1(1), 1–10. https://doi.org/10.31284/j.senopati.2019.v1i1.517
Fitria, L., Tauhida, D., & Sokhibi, A. (2023). Pengendalian Kualitas dengan Metode Six Sigma untuk Meminimasi Defect Produk Kain Polyester di PT Sukuntex. Opsi, 16(1), 110–120.
Hairiyah, N., & Amalia, R. R. (2020). PENGENDALIAN KUALITAS PRODUK TAHU MENGGUNAKAN METODE SIX SIGMA DI UD. SUMBER URIP. Agrointek, 14(1).
Hidayat, I. K., & Suseno. (2023). ANALISIS PENGENDALIAN KUALITAS BRACKET DENGAN MENGGUNAKAN METODE SIX SIGMA (DMAIC). Jurnal Cakrawala Ilmiah, 2(10), 310–324. https://bnr.bg/post/101787017/bsp-za-balgaria-e-pod-nomer-1-v-buletinata-za-vota-gerb-s-nomer-2-pp-db-s-nomer-12
Ivanda, M. A., & Suliantoro, H. (2019). Analisis Pengendalian Kualitas Dengan Metode Six Sigma Pada Proses Produksi Barecore PT. Bakti Putra NusantaraIvanda, M. A., & Suliantoro, H. (2018). Analisis Pengendalian Kualitas Dengan Metode Six Sigma Pada Proses Produksi Barecore PT. Bakti Putra Nusa. Industrial Engineering Online Journal, 7(1), 1–7. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/20724
Kadek, N., & Sari, R. (2019). ANALISIS PENGENDALIAN KUALITAS PROSES PRODUKSI PIE SUSU PADA PERUSAHAAN PIE SUSU BARONG DI KOTA DENPASAR. E-Jurnal Manajemen Unud, 7(3), 1566–1594.
Khoerunnisa, A., Miftahurahman, M. R., & Nugroho, I. S. (2023). Analisis Pengendalian Kualitas Produk Hinge AFT dengan Metode Six Sigma di PT X. Jurnal Surya Teknika, 10(1), 547–551. https://doi.org/10.37859/jst.v10i1.4810
Rossadi, P., & Sumiati. (2023). Quality Control of Midsole Products Using Statistical Quality Control (SQC) and Failure Mode Effect Analysis (FMEA) Methods in PT. XYZ. Indonesian Journal of Industrial Engineering & Management, 4(3), 495–505. https://doi.org/10.22441/ijiem.v4i3.22406
Suharjo, & Sudiro, S. (2018). Pengurangan Pemborosan Pada Proses Produksi Menggunakan WRM, WAQ dan Valsat Pada Sistem Manufaktur. Jurna lIlmiah TEKNOBIZ, 8(2), 291–302.
Suryana, D. Z., & Widjatmaka, T. (2022). Analisis Pengendalian Kualitas Produk Pin Crank pada Proses NC Lathe Berdasarkan Diameter di PT. X Menggunakan Metode DMAIC. Prosiding Seminar Nasional Teknik Mesin Politeknik Negeri Jakarta, 1(1), 656–665. http://prosiding.pnj.ac.id
Wardah, S., Suharto, S., & Lestari, R. (2022). Analisis Pengendalian Kualitas Proses Produksi Produk Nata De Coco Dengan Metode Statistic Quality Control ( Sqc ). JISI: Jurnal Integrasi Sistem Industri, 9(2), 165. https://doi.org/10.24853/jisi.9.2.165-175
Widyantoro, M., & Danielson Adisyah. (2020). Analisis Pengendalian Kualitas pada Proses Produksi Crankshaft dengan Menggunakan Metode DMAIC di PT. XYZ. Journal of Industrial and Engineering System, 1(2), 127–136. https://doi.org/10.31599/jies.v1i2.348
